PHP 8.3.4 Released!

strripos

(PHP 5, PHP 7, PHP 8)

strripos文字列中で、特定の(大文字小文字を区別しない)文字列が最後に現れた位置を探す

説明

strripos(string $haystack, string $needle, int $offset = 0): int|false

文字列 haystack の中で、 needle が最後に現れる位置を探します。

strrpos() と異なり、strripos() は大文字小文字を区別しません。

パラメータ

haystack

検索対象の文字列。

needle

検索する文字列。

PHP 8.0.0 より前のバージョンでは、needle が文字列でない場合、 数値に変換され、文字の通常の値として扱われていました。 この振る舞いは PHP 7.3.0 以降では推奨されないので、 この機能を使用しないことを強く推奨します。 意図した動作に依存する場合、 needle を string に明示的にキャストするか、 明示的に chr() 関数を呼び出すべきでしょう。

offset

ゼロまたは正の値の場合、 haystack の 最初の offset バイトをスキップし、 左から右に検索が行われます。

負の値の場合、 haystack の 最後の offset バイトをスキップし、 右から左に検索が行われ、 needle が最初に現れる場所を探します。

注意:

この方が、最後の offset バイトより前にある、 最後の needle を効率的に探せます。

戻り値

needle が見つかった位置を、 haystack 文字列の先頭 (offset の値とは無関係) からの相対位置で返します。

注意: 文字列の開始位置は 0 であり、1 ではありません。

needle が見つからない場合は false を返します。

警告

この関数は論理値 false を返す可能性がありますが、false として評価される値を返す可能性もあります。 詳細については 論理値の セクションを参照してください。この関数の返り値を調べるには ===演算子 を 使用してください。

変更履歴

バージョン 説明
8.0.0 needle は、空文字列を受け入れるようになりました。
8.2.0 ケースフォールディングは、setlocale() で設定されたロケールに依存しなくなりました。 ASCII のケースフォールディングのみが行われます。 ASCII でないバイト列は、バイト値として比較されます。
8.0.0 needle に数値を渡すことはサポートされなくなりました。
7.3.0 needle に数値を渡すことは非推奨になりました。

例1 単純な strripos() の例

<?php
$haystack
= 'ababcd';
$needle = 'aB';

$pos = strripos($haystack, $needle);

if (
$pos === false) {
echo
"ごめんなさい、($needle) が ($haystack) の中に見つかりませんでした。";
} else {
echo
"おめでとう!\n";
echo
"($needle) が最後に ($haystack) に現れた位置は ($pos) です。";
}
?>

上の例の出力は以下となります。

おめでとう!
   (aB) が最後に (ababcd) に現れた位置は (2) です。

参考

  • strpos() - 文字列内の部分文字列が最初に現れる場所を見つける
  • stripos() - 大文字小文字を区別せずに文字列が最初に現れる位置を探す
  • strrpos() - 文字列中に、ある部分文字列が最後に現れる場所を探す
  • strrchr() - 文字列中に文字が最後に現れる場所を取得する
  • stristr() - 大文字小文字を区別しない strstr
  • substr() - 文字列の一部分を返す

add a note

User Contributed Notes 7 notes

up
4
Yanik Lupien
16 years ago
Simple way to implement this function in PHP 4

<?php
if (function_exists('strripos') == false) {
function
strripos($haystack, $needle) {
return
strlen($haystack) - strpos(strrev($haystack), $needle);
}
}

?>
up
2
dimmav at in dot gr
15 years ago
Suppose you just need a stripos function working backwards expecting that strripos does this job, you better use the following code of a custom function named strbipos:

<?php
function strbipos($haystack="", $needle="", $offset=0) {
// Search backwards in $haystack for $needle starting from $offset and return the position found or false

$len = strlen($haystack);
$pos = stripos(strrev($haystack), strrev($needle), $len - $offset - 1);
return ( (
$pos === false) ? false : $len - strlen($needle) - $pos );
}

// Test
$body = "01234Xy7890XYz456xy90";
$str = "xY";
$len = strlen($body);
echo
"TEST POSITIVE offset VALUES IN strbipos<br>";
for (
$i = 0; $i < $len; $i++) {
echo
"Search in [$body] for [$str] starting from offset [$i]: [" . strbipos($body, $str, $i) . "]<br>";
}
?>

Note that this function does exactly what it says and its results are different comparing to PHP 5 strripos function.
up
1
peev[dot]alexander at gmail dot com
16 years ago
I think you shouldn't underestimate the length of $needle in the search of THE FIRST POSITION of it's last occurrence in the string. I improved the posted function, with added support for offset. I think this is an exact copy of the real function:

<?php
if(!function_exists("strripos")){
function
strripos($haystack, $needle, $offset=0) {
if(
$offset<0){
$temp_cut = strrev( substr( $haystack, 0, abs($offset) ) );
}
else{
$temp_cut = strrev( substr( $haystack, $offset ) );
}
$pos = strlen($haystack) - (strpos($temp_cut, strrev($needle)) + $offset + strlen($needle));
if (
$pos == strlen($haystack)) { $pos = 0; }
return
$pos;
}
/* endfunction strripos*/
}/* endfunction exists strripos*/
?>
up
-1
Anonymous
13 years ago
Generally speaking, linear searches are from start to end, not end to start - which makes sense from a human perspective. If you need to find strings in a string backwards, reverse your haystack and needle rather than manually chopping it up.
up
-1
peev[dot]alexander at gmail dot com
15 years ago
OK, I guess this will be the final function implementation for PHP 4.x versions ( my previous posts are invalid )

<?php

if(!function_exists("stripos")){
function
stripos( $str, $needle, $offset = 0 ){
return
strpos( strtolower( $str ), strtolower( $needle ), $offset );
}
/* endfunction stripos */
}/* endfunction exists stripos */

if(!function_exists("strripos")){
function
strripos( $haystack, $needle, $offset = 0 ) {
if( !
is_string( $needle ) )$needle = chr( intval( $needle ) );
if(
$offset < 0 ){
$temp_cut = strrev( substr( $haystack, 0, abs($offset) ) );
}
else{
$temp_cut = strrev( substr( $haystack, 0, max( ( strlen($haystack) - $offset ), 0 ) ) );
}
if( (
$found = stripos( $temp_cut, strrev($needle) ) ) === FALSE )return FALSE;
$pos = ( strlen( $haystack ) - ( $found + $offset + strlen( $needle ) ) );
return
$pos;
}
/* endfunction strripos */
}/* endfunction exists strripos */
?>
up
-3
ElectroFox
16 years ago
Sorry, I made that last post a bit prematurely. One more thing wrong with the simple php4 version is that it breaks if the string is not found. It should actually look like this:

<?php
if (function_exists('strripos') == false) {
function
strripos($haystack, $needle) {
$pos = strlen($haystack) - strpos(strrev($haystack), strrev($needle));
if (
$pos == strlen($haystack)) { $pos = 0; }
return
$pos;
}
}
?>

Note, we now check to see if the $needle was found, and if it isn't, we return 0.
up
-7
admin at e-xxi dot net
14 years ago
strripos() has very strange behaviour when you provide search position. For some reason it searches forward from the given position, instead of searching backward, that is more logical.

For example if you want to find instanse of $what, previous to the last, strripos($where, $what, $last_what_pos-1) will not wark as expected. It will return $last_what_pos again and again. And that has no sence at all.

To prevent this, I just used $prev_last_what_pos = strripos(substr($where,0,$last_what_pos), $what);
To Top