PHP 8.3.4 Released!

Übersicht über Namespaces

(PHP 5 >= 5.3.0, PHP 7, PHP 8)

Was sind Namespaces? Im weitesten Sinne bieten Namespaces eine Möglichkeit, verschiedene Gegenstände zu kapseln. Dies kann man als abstraktes Konzept an vielen Dingen beobachten. In einem Betriebssystem dienen zum Beispiel Verzeichnisse dazu, um zusammengehörige Dateien zu gruppieren, und dienen als Namespace für die beinhalteten Dateien. In einem konkreten Beispiel kann die Datei foo.txt sowohl im Verzeichnis /home/greg als auch in /home/other existieren, aber es können keine zwei Varianten der Datei foo.txt im gleichen Verzeichnis existieren. Um auf die Datei foo.txt von außerhalb des Verzeichnisses /home/greg zuzugreifen, muss man zusätzlich dem Verzeichnisnamen den Dateinamen und ein Trennzeichen voranstellen, um /home/greg/foo.txt zu erhalten. Das gleiche Prinzip streckt sich auf Namespaces in der Programmierwelt aus.

In der Welt von PHP wurden Namespaces entworfen, um zwei Probleme zu lösen, auf die die Autoren von Bibliotheken und Anwendungen stoßen, wenn sie wiederverwendbare Codeelemente wie Klassen und Funktionen entwickeln:

  1. Namenskollisionen zwischen eigenem Code und internen PHP-Klassen/Funktionen/Konstanten oder Klassen/Funktionen/Konstanten von Drittanbietern.
  2. Die Möglichkeit, einen Alias (oder einen Kurznamen) für Sehr_Lange_Namen einzuführen, die geschaffen wurde, um das erste Problem zu umgehen. Damit kann man die Lesbarkeit des Quellcodes erhöhen.

PHP-Namespaces bieten eine Möglichkeit, zusammengehörige Klassen, Interfaces, Funktionen und Konstanten zusammenzufassen. Dies ist ein Beispiel für die Namespace-Syntax in PHP:

Beispiel #1 Beispiel für Namespace-Syntax

<?php
namespace my\name; // siehe Abschnitt "Namespaces definieren"

class MyClass {}
function
myfunction() {}
const
MYCONST = 1;

$a = new MyClass;
$c = new \my\name\MyClass; // siehe Abschnitt "Globaler Namensraum"

$a = strlen('hi'); // siehe Abschnitt "Namespaces verwenden: Rückgriff auf
// globale Funktion/Konstante"

$d = namespace\MYCONST; // siehe Abschnitt "Namespace-Schlüsselwort und __NAMESPACE__-
// Konstante"
$d = __NAMESPACE__ . '\MYCONST';
echo
constant($d); // siehe Abschnitt "Namespaces und dynamische Sprachfeatures"
?>

Hinweis: Bei Namespace-Namen wird nicht zwischen Groß- und Kleinschreibung unterschieden.

Hinweis:

Der Namespace PHP, sowie zusammengesetzte Namen, die mit dieser Bezeichnung beginnen (wie z. B. PHP\Classes), sind zur internen Verwendung in der Sprache reserviert und sollten im eigenen Programmcode nicht verwendet werden.

add a note

User Contributed Notes 4 notes

up
878
SteveWa
13 years ago
Thought this might help other newbies like me...

Name collisions means:
you create a function named db_connect, and somebody elses code that you use in your file (i.e. an include) has the same function with the same name.

To get around that problem, you rename your function SteveWa_db_connect which makes your code longer and harder to read.

Now you can use namespaces to keep your function name separate from anyone else's function name, and you won't have to make extra_long_named functions to get around the name collision problem.

So a namespace is like a pointer to a file path where you can find the source of the function you are working with
up
291
Dmitry Snytkine
12 years ago
Just a note: namespace (even nested or sub-namespace) cannot be just a number, it must start with a letter.
For example, lets say you want to use namespace for versioning of your packages or versioning of your API:

namespace Mynamespace\1; // Illegal
Instead use this:
namespace Mynamespace\v1; // OK
up
177
pierstoval at gmail dot com
9 years ago
To people coming here by searching about namespaces, know that a consortium has studied about best practices in PHP, in order to allow developers to have common coding standards.

These best practices are called "PHP Standard Recommendations" , also known as PSR.

They are visible on this link : http://www.php-fig.org/psr

Actually there are 5 coding standards categories :
PSR-0 : Autoloading Standard , which goal is to make the use of Namespaces easier, in order to convert a namespace into a file path.
PSR-1 : Basic Coding Standard , basically, standards :)
PSR-2 : Coding Style Guide, where to put braces, how to write a class, etc.
PSR-3 : Logger Interface , how to write a standard logger
PSR-4 : Improved Autoloading , to resolve more Namespaces into paths.

The ones I want to point are PSR-0 and PSR-4 : they use namespaces to resolve a FQCN (Fully qualified class name = full namespace + class name) into a file path.
Basic example, you have this directory structure :
./src/Pierstoval/Tools/MyTool.php

The namespacing PSR-0 or PSR-4 standard tells that you can transform this path into a FQCN.
Read the principles of autoload if you need to know what it means, because it's almost mandatory ;) .

Structure :
{path}/autoloader.php
{path}/index.php
{path}/src/Pierstoval/Tools/MyTool.php

Files :

<?php
// {path}/index.php
include 'autoloader.php';
$tool = new Pierstoval/Tools/MyTool();
?>

<?php
// {path}/src/Pierstoval/Tools/MyTool.php
namespace Pierstoval\Tools;
class
MyTool {}
?>

<?php
// {path}/autoloader.php
function loadClass($className) {
$fileName = '';
$namespace = '';

// Sets the include path as the "src" directory
$includePath = dirname(__FILE__).DIRECTORY_SEPARATOR.'src';

if (
false !== ($lastNsPos = strripos($className, '\\'))) {
$namespace = substr($className, 0, $lastNsPos);
$className = substr($className, $lastNsPos + 1);
$fileName = str_replace('\\', DIRECTORY_SEPARATOR, $namespace) . DIRECTORY_SEPARATOR;
}
$fileName .= str_replace('_', DIRECTORY_SEPARATOR, $className) . '.php';
$fullFileName = $includePath . DIRECTORY_SEPARATOR . $fileName;

if (
file_exists($fullFileName)) {
require
$fullFileName;
} else {
echo
'Class "'.$className.'" does not exist.';
}
}
spl_autoload_register('loadClass'); // Registers the autoloader
?>

A standardized autoloader will get the class you want to instanciate (MyTool) and get the FQCN, transform it into a file path, and check if the file exists. If it does, it will <?php include(); ?> it, and if you wrote your class correctly, the class will be available within its correct namespace.
Then, if you have the following code :
<?php $tool = new Pierstoval/Tools/MyTool(); ?>
The autoloader will transform the FQCN into this path :
{path}/src/Pierstoval/Tools/MyTool.php

This might be the best practices ever in PHP framework developments, such as Symfony or others.
up
24
shewa12kpi at gmail dot com
2 years ago
<?php
//Here is the simple use case of namespace. See how we can use same named class with the help of namespace. This is how namespace resolve naming collision.

namespace Mobile;

class
User
{

public
$name = 'mobile user';
}

$user = new \Mobile\User;
echo
$user->name;

namespace
TV ;

class
User
{
public static
$name = 'tv user';
}

echo
\TV\User::$name;
To Top