PHP 8.3.4 Released!

openssl_csr_new

(PHP 4 >= 4.2.0, PHP 5, PHP 7, PHP 8)

openssl_csr_newErzeugt einen CSR

Beschreibung

openssl_csr_new(
    array $distinguished_names,
    OpenSSLAsymmetricKey &$private_key,
    ?array $options = null,
    ?array $extra_attributes = null
): OpenSSLCertificateSigningRequest|false

openssl_csr_new() erzeugt einen neuen CSR (Certificate Signing Request, Zertifikats-Signierungsanfrage) basierend auf den Informationen, die mit dem Parameter distinguished_names angegeben werden.

Hinweis: Die ordnungsgemäße Ausführung dieser Funktion setzt die Installation einer gültigen openssl.cnf-Datei voraus. Mehr Information hierzu sind im Abschnitt Installation zu finden.

Parameter-Liste

distinguished_names

Der Distinguished Name oder die Subjekt-Felder, die im Zertifikat verwendet werden sollen.

private_key

Der private_key muss ein privater Schlüssel sein, der vorher mit openssl_pkey_new() (oder einer anderen Funktion aus der openssl_pkey-Familie) erzeugt wurde. Der entsprechende öffentliche Teil des Schlüssels wird verwendet, um den CSR zu signieren.

options

In der Standardeinstellung werden die Informationen für die Anfrage aus der openssl.conf ihres Systems verwendet. Sie können einen Konfigurationsabsschnitt mit dem Schlüssel config_section_section des Arrays options setzen. Außerdem haben Sie die Möglichkeit, eine alternative OpenSSL-Konfigurationsdatei anzugeben, indem Sie den Wert des Schlüssels config auf den Pfad zu der Datei setzen, die Sie verwenden möchten. Die unten in der Tabelle aufgeführten Schlüssel, soweit in options vorhanden, verhalten sich genau gleich wie die entsprechenden Werte in der openssl.conf

Überschreiben der Konfiguration
options-Schlüssel Typ openssl.conf-Entsprechung Beschreibung
digest_alg string default_md Digest-Methode oder Signaturhash, üblicherweise eins von openssl_get_md_methods().
x509_extensions string x509_extensions Bestimmt, welche Erweiterung verwendet werden soll, wenn ein x509-Zertifikat erzeugt werden soll.
req_extensions string req_extensions Bestimmt welche Erweiterung verwendet werden soll, wenn eine Zertifikats-Signierungsanfrage (CSR) erzeugt werden soll.
private_key_bits int default_bits Bestimmt wieviele Bits verwendet werden sollen, um einen privaten Schlüssel zu erzeugen.
private_key_type int keine Bestimmt den Typ des privaten Schlüssels, der erzeugt werden soll. Der Typ kann einer der folgenden sein: OPENSSL_KEYTYPE_DSA, OPENSSL_KEYTYPE_DH, OPENSSL_KEYTYPE_RSA oder OPENSSL_KEYTYPE_EC. Der Standardwert ist OPENSSL_KEYTYPE_RSA.
encrypt_key bool encrypt_key Soll ein exportierter Schlüssel (mit Passphrase) verschlüsselt werden?
encrypt_key_cipher int keine Eine der Ziffer-Konstanten.
curve_name string none Einer der openssl_get_curve_names().
config string N/A Pfad zur eigenen alternativen openssl.conf-Datei.

extra_attributes

extra_attributeskann verwendet werden, um zusätzliche Konfigurationsoptionen für den CSR anzugeben. Sowohl distinguished_names als auch extra_attributes sind assoziative Arrays, deren Schlüssel zu OIDs konvertiert und auf den relevanten Teil der Anfrage angewendet werden.

Rückgabewerte

Gibt den CSR zurück. Bei einem Fehler wird false zurückgegeben.

Changelog

Version Beschreibung
8.0.0 Bei Erfolg gibt diese Funktion nun eine OpenSSLCertificateSigningRequest-Instanz zurück; vorher wurde eine Ressource vom Typ OpenSSL X.509 CSR zurückgegeben.
8.0.0 private_key akzeptiert nun eine OpenSSLAsymmetricKey-Instanz; vorher wurde eine Ressource vom Typ OpenSSL-Schlüssel akzeptiert.
7.1.0 options unterstützt nun auch curve_name.

Beispiele

Beispiel #1 Erzeugen eines selbstsignierten Zertifikats

<?php
// bei SSL-Zertifikate ist der commonName der zu sichernde Domain-Name
// bei S/MIME-Zertifikate ist der commonName der Eigentümer der E-Mail-Adresse
// die Felder location und identification beziehen sich auf den Eigentümer der
// zu sichernden Domain oder des E-Mail-Eigentümers
$dn = array(
"countryName" => "GB",
"stateOrProvinceName" => "Somerset",
"localityName" => "Glastonbury",
"organizationName" => "The Brain Room Limited",
"organizationalUnitName" => "PHP Documentation Team",
"commonName" => "Wez Furlong",
"emailAddress" => "wez@example.com"
);

// Erzeugen eines neuen privaten (und öffentlichen) Schlüsselpaars
$privkey = openssl_pkey_new(array(
"private_key_bits" => 2048,
"private_key_type" => OPENSSL_KEYTYPE_RSA,
));

// Erzeugen einer Zertifikats-Signierungsanfrage
$csr = openssl_csr_new($dn, $privkey, array('digest_alg' => 'sha256'));

// Erzeugen eines selbstsignierten Zertifikats, das für die Dauer von 365 Tagen
// gültig ist.
$x509 = openssl_csr_sign($csr, null, $privkey, $days=365, array('digest_alg' => 'sha256'));

// Sichern des privaten Schlüssels, des CSR und des selbstsignierten
// Zertifikats für die spätere Verwendung
openssl_csr_export($csr, $csrout) and var_dump($csrout);
openssl_x509_export($x509, $certout) and var_dump($certout);
openssl_pkey_export($privkey, $pkeyout, "mypassword") and var_dump($pkeyout);

// Anzeigen aller aufgetretenen Fehler
while (($e = openssl_error_string()) !== false) {
echo
$e . "\n";
}
?>

Beispiel #2 Erzeugen eines selbstsignierten ECC-Zertifikats (von PHP 7.1.0 an)

<?php
$subject
= array(
"commonName" => "docs.php.net",
);

// Erzeugen eines neuen privaten (und öffentlichen) Schlüsselpaars
$private_key = openssl_pkey_new(array(
"private_key_type" => OPENSSL_KEYTYPE_EC,
"curve_name" => 'prime256v1',
));

// Erzeugen einer Zertifikats-Signierungsanfrage
$csr = openssl_csr_new($subject, $private_key, array('digest_alg' => 'sha384'));

// Erzeugen eines selbstsignierten EC-Zertifikats
$x509 = openssl_csr_sign($csr, null, $private_key, $days=365, array('digest_alg' => 'sha384'));
openssl_x509_export_to_file($x509, 'ecc-cert.pem');
openssl_pkey_export_to_file($private_key, 'ecc-private.key');
?>

Siehe auch

  • openssl_csr_sign() - Signiert einen CSR mit einem anderen Zertifikat (oder sich selbst) und generiert ein Zertifikat

add a note

User Contributed Notes 10 notes

up
11
The_Lost_One
14 years ago
Not sure whether the "bug" (undocumented behavior) I encountered is common to other people, but this comment might save hours of painful debug:
If you can't generate a new private key using openssl_pkey_new() or openssl_csr_new(), your script hangs during the call of these functions and in case you specified a "private_key_bits" parameter, ensure that you cast the variable to an int. Took me ages to notice that.

<?php
$SSLcnf
= array('config' => '/usr/local/nessy2/share/ssl/openssl.cnf',
'encrypt_key' => true,
'private_key_type' => OPENSSL_KEYTYPE_RSA,
'digest_alg' => 'sha1',
'x509_extensions' => 'v3_ca',
'private_key_bits' => $someVariable // ---> bad
'private_key_bits' => (int)$someVariable // ---> good
'private_key_bits' => 512 // ---> obviously good
);
?>
up
6
james at kirk dot com
8 years ago
When in doubt, read the source code to PHP!

$configargs is fairly opaque as to what is going on behind the scenes. That is, until you actually look at php_openssl_parse_config() in '/ext/openssl/openssl.c':

SET_OPTIONAL_STRING_ARG("digest_alg", req->digest_name,
CONF_get_string(req->req_config, req->section_name, "default_md"));
SET_OPTIONAL_STRING_ARG("x509_extensions", req->extensions_section,
CONF_get_string(req->req_config, req->section_name, "x509_extensions"));
SET_OPTIONAL_STRING_ARG("req_extensions", req->request_extensions_section,
CONF_get_string(req->req_config, req->section_name, "req_extensions"));
SET_OPTIONAL_LONG_ARG("private_key_bits", req->priv_key_bits,
CONF_get_number(req->req_config, req->section_name, "default_bits"));

SET_OPTIONAL_LONG_ARG("private_key_type", req->priv_key_type, OPENSSL_KEYTYPE_DEFAULT);

Here we can see that SET_OPTIONAL_STRING_ARG() is called for most inputs but for 'private_key_bits' SET_OPTIONAL_LONG_ARG() is called. Both calls are C macros that expand to code that enforces the expected input type. The generated code ignores the input without warning/notice if an unexpected type is used and just uses the default from the configuration file. This is why using a string with 'private_key_bits' will result in unexpected behavior.

Further inspection of the earlier initialization in the same function:

SET_OPTIONAL_STRING_ARG("config", req->config_filename, default_ssl_conf_filename);
SET_OPTIONAL_STRING_ARG("config_section_name", req->section_name, "req");
req->global_config = CONF_load(NULL, default_ssl_conf_filename, NULL);
req->req_config = CONF_load(NULL, req->config_filename, NULL);

if (req->req_config == NULL) {
return FAILURE;
}

And elsewhere in another function:

/* default to 'openssl.cnf' if no environment variable is set */
if (config_filename == NULL) {
snprintf(default_ssl_conf_filename, sizeof(default_ssl_conf_filename), "%s/%s",
X509_get_default_cert_area(),
"openssl.cnf");
} else {
strlcpy(default_ssl_conf_filename, config_filename, sizeof(default_ssl_conf_filename));
}

Reveals that 'config' in $configargs is an override for any default setting elsewhere. This actually negates the comment in the documentation that says "Note: You need to have a valid openssl.cnf installed for this function to operate correctly. See the notes under the installation section for more information." A more correct sentence would be "Note: You need to either have a valid openssl.cnf set up or use $configargs to point at a valid openssl.cnf file for this function to operate correctly."

All of that goes to show that looking at the PHP source code is the only real way to figure out what is actually happening. Doing so saves time and effort.
up
3
Anonymous
9 years ago
For those of you using Debian-based systems, the openssl configuration file is at: /etc/ssl/openssl.cnf
up
2
main ATT jokester DOTT fr
15 years ago
To set the "basicConstraints" to "critical,CA:TRUE", you have to define configargs, but in the openssl_csr_sign() function !

That's my example of code to sign a "child" certificate :

$CAcrt = "file://ca.crt";
$CAkey = array("file://ca.key", "myPassWord");

$clientKeys = openssl_pkey_new();
$dn = array(
"countryName" => "FR",
"stateOrProvinceName" => "Finistere",
"localityName" => "Plouzane",
"organizationName" => "Ecole Nationale d'Ingenieurs de Brest",
"organizationalUnitName" => "Enib Students",
"commonName" => "www.enib.fr",
"emailAddress" => "ilovessl@php.net"
);
$csr = openssl_csr_new($dn, $clientPrivKey);

$configArgs = array("x509_extensions" => "v3_req");
$cert = openssl_csr_sign($csr, $CAcrt, $CAkey, 100, $configArgs);

openssl_x509_export_to_file($cert, "childCert.crt");

Then if you want to add some more options, you can edit the "/etc/ssl/openssl.cnf" ssl config' file (debian path), and add these after the [ v3_req ] tag.
up
3
alex at nodex dot co dot uk
9 years ago
In the PHP example above it uses "UK" as the country name which is incorrect, the country name must be "GB"
up
0
Richard Lynch
10 years ago
There appears to be no openssl_csr_free function.

At least not here.

If it's in the source, one might be able to just call it.

If it's not in the source, it probably should be.
up
0
Anonymous
18 years ago
If you get the error:

error:0D11A086:asn1 encoding routines:ASN1_mbstring_copy:string too short

then look at your key:value pairs in the $dn (distinguished name) array.

If you have one value (like "organizationalUnitName" = "") set to an empty string, it will throw the above error.

Fix the error by either eliminating that array element from $dn completely, or using a space " " instead of an empty string.
up
0
robertliu AT wiscore DOT com
18 years ago
I am using PHP-4.3.11.
The type of configargs--private_key_bits is a INTEGER, not a string.
An example of configration:
<?php
$config
= array(
"digest_alg" => "sha1",
"private_key_bits" => 2048,
"private_key_type" => OPENSSL_KEYTYPE_DSA,
"encrypt_key" => false
);
?>
up
-1
dankybastard at hotmail
19 years ago
As you probably guessed from the example, the documentation is misinforming. openssl_csr_new returns a CSR resource or FALSE on failure.

mixed openssl_csr_new (assoc_array dn, resource_privkey, [...])
up
-2
@operator
7 years ago
One command to create modern certificate request with 4 SAN subdomain.
According to RFC you can change CN (common name) and subjectAltName. When cert validated searching in CN and subjectAltName.

openssl req -new -nodes -config <( cat <<-EOF
[req]
default_bits = 2048
prompt = no
default_md = sha256
req_extensions = re
distinguished_name = dn
[ dn ]
CN = my.tld
C = country
ST = state
L = location
O = ORGANISATION
[ re ]
subjectAltName = DNS.1: www.my.tld, DNS.2: www2.my.tld, DNS.3: www3.my.tld, DNS.4: www4.my.tld
EOF
) -keyout secret.key -out req.csr
To Top