CakeFest 2024: The Official CakePHP Conference

file_put_contents

(PHP 5, PHP 7, PHP 8)

file_put_contentsVeriyi bir dosyaya yazar

Açıklama

file_put_contents(
    string $dosyaismi,
    mixed $veri,
    int $seçenekler = 0,
    ?resource $bağlam = null
): int|false

Bu işlev, veriyi bir dosyaya yazmak için sırayla fopen(), fwrite() ve fclose() işlevlerinin çağrılmasına denk bir işlem yapar.

Eğer dosyaismi mevcut değilse dosya oluşturulur. Aksi takdirde, FILE_APPEND seçeneği etkin değilse veri mevcut dosyanın üzerine yazılır.

Bağımsız Değişkenler

dosyaismi

Verinin yazılacağı dosyanın yolu.

veri

Yazılacak veri. Bir dizi, bir dizge veya bir özkaynak olabilir.

Eğer veri bir akım özkaynağı ise tamponda kalan verinin tamamı dosyaya yazılır. Bu işlem, stream_copy_to_stream() kullanımına eşdğerdir.

veri bağımsız değişkeninde tek boyutlu bir dizi de belirtebilirsiniz. Bu takdirde yapılan işlem file_put_contents(dosyaismi, implode('', $dizi)) işlemine denktir.

seçenekler

İsteğe bağlı bu bağımsız değişkende bazı kısıtlamalarla şu sabitlerden bir veya daha fazlasını ikil VEYA (|) ile birleştirerek belirtebilirsiniz:

Belirtilebilecek seçenekler
Seçenet Açıklama
FILE_USE_INCLUDE_PATH Dosya include_path yönergesinde belirtilen yollarda aranır.
FILE_APPEND Eğer dosyaismi dosyası mevcutsa veri dosyanın üzerine yazılmaz, sonuna eklenir.
LOCK_EX Yazma işlemi için dosya üzerinde ayrıcalıklı bir kilit edinilir. Başka bir deyişle, fopen() ve fwrite() çağrıları arasında bir flock() çağrısı yapılır. Bu, "x" kipiyle fopen() çağrısına denk değildir.

bağlam

stream_context_create() ile oluşturulmuş geçerli bir bağlam özkaynağı.

Dönen Değerler

İşlev, başarısızlık durumunda false, aksi takdirde dosyaya yazılan baytların sayısı ile döner.

Uyarı

Bu işlev mantıksal false değeriyle dönebileceği gibi false olarak değerlendirilebilecek mantıksal olmayan bir değerle de dönebilir. Bu konuda daha fazla bilgi Mantıksal Değerler bölümünde bulunabilir. Bu işlevden dönen değeri sınamak için === işleci kullanılabilir.

Örnekler

Örnek 1 - Basit kullanım örneği

<?php
$file
= 'people.txt';
// İçeriğini almak için dosyayı açalım
$içerik = file_get_contents($file);
// İçeriğe yeni bir kişi ekleyelim
$içerik .= "John Smith\n";
// İçeriği dosyaya yazalım
file_put_contents($file, $içerik);
?>

Örnek 2 - Seçenek kullanımı

<?php
$file
= 'people.txt';
// Dosyaya eklenecek yeni kişi
$person = "John Smith\n";
// $person değişkeninin değerini $file dosyasına ekleyelim.
// FILE_APPEND veriyi dosyanın sonuna ekler.
// LOCK_EX aynı anda başka birinin başka bir şey yazmasını engeller.
file_put_contents($file, $person, FILE_APPEND | LOCK_EX);
?>

Notlar

Bilginize: Bu işlev ikil dosyalarla çalışırken dosya içeriğini değiştirmez.

İpucu

fopen sarmalayıcıları etkin kılınmışsa bu işlevde dosya ismi olarak bir URL belirtilebilir. Dosya isminin nasıl belirtilebileceği hakkında bilgi edinmek için fopen() işlevine bakılabilir. Sarmalayıcıların neler yapabildiği, kullanım bilgileri ve bunlar tarafından kullanılan öntanımlı değişkenler hakkında bilgi Desteklenen Protokoller ve Sarmalayıcılar bölümünde bulanabilir.

Ayrıca Bakınız

add a note

User Contributed Notes 19 notes

up
130
TrentTompkins at gmail dot com
15 years ago
File put contents fails if you try to put a file in a directory that doesn't exist. This creates the directory.

<?php
function file_force_contents($dir, $contents){
$parts = explode('/', $dir);
$file = array_pop($parts);
$dir = '';
foreach(
$parts as $part)
if(!
is_dir($dir .= "/$part")) mkdir($dir);
file_put_contents("$dir/$file", $contents);
}
?>
up
54
justin dot carlson at gmail dot com
12 years ago
It should be obvious that this should only be used if you're making one write, if you are writing multiple times to the same file you should handle it yourself with fopen and fwrite, the fclose when you are done writing.

Benchmark below:

file_put_contents() for 1,000,000 writes - average of 3 benchmarks:

real 0m3.932s
user 0m2.487s
sys 0m1.437s

fopen() fwrite() for 1,000,000 writes, fclose() - average of 3 benchmarks:

real 0m2.265s
user 0m1.819s
sys 0m0.445s
up
6
Anonymous
1 year ago
A more simplified version of the method that creates subdirectories:

function path_put_contents($filePath, $contents, $flags = 0) {

if (! is_dir($dir = implode('/', explode('/', $filePath, -1))))
mkdir($dir, 0777, true);
file_put_contents($filePath, $contents, $flags);
}
up
19
maksam07 at gmail dot com
5 years ago
A slightly simplified version of the method: http://php.net/manual/ru/function.file-put-contents.php#84180

<?php
function file_force_contents( $fullPath, $contents, $flags = 0 ){
$parts = explode( '/', $fullPath );
array_pop( $parts );
$dir = implode( '/', $parts );

if( !
is_dir( $dir ) )
mkdir( $dir, 0777, true );

file_put_contents( $fullPath, $contents, $flags );
}

file_force_contents( ROOT.'/newpath/file.txt', 'message', LOCK_EX );
?>
up
27
deqode at felosity dot nl
14 years ago
Please note that when saving using an FTP host, an additional stream context must be passed through telling PHP to overwrite the file.

<?php
/* set the FTP hostname */
$user = "test";
$pass = "myFTP";
$host = "example.com";
$file = "test.txt";
$hostname = $user . ":" . $pass . "@" . $host . "/" . $file;

/* the file content */
$content = "this is just a test.";

/* create a stream context telling PHP to overwrite the file */
$options = array('ftp' => array('overwrite' => true));
$stream = stream_context_create($options);

/* and finally, put the contents */
file_put_contents($hostname, $content, 0, $stream);
?>
up
19
chris at ocportal dot com
10 years ago
It's important to understand that LOCK_EX will not prevent reading the file unless you also explicitly acquire a read lock (shared locked) with the PHP 'flock' function.

i.e. in concurrent scenarios file_get_contents may return empty if you don't wrap it like this:

<?php
$myfile
=fopen('test.txt','rt');
flock($myfile,LOCK_SH);
$read=file_get_contents('test.txt');
fclose($myfile);
?>

If you have code that does a file_get_contents on a file, changes the string, then re-saves using file_put_contents, you better be sure to do this correctly or your file will randomly wipe itself out.
up
8
egingell at sisna dot com
17 years ago
In reply to the previous note:

If you want to emulate this function in PHP4, you need to return the bytes written as well as support for arrays, flags.

I can only figure out the FILE_APPEND flag and array support. If I could figure out "resource context" and the other flags, I would include those too.

<?

define('FILE_APPEND', 1);
function file_put_contents($n, $d, $flag = false) {
$mode = ($flag == FILE_APPEND || strtoupper($flag) == 'FILE_APPEND') ? 'a' : 'w';
$f = @fopen($n, $mode);
if ($f === false) {
return 0;
} else {
if (is_array($d)) $d = implode($d);
$bytes_written = fwrite($f, $d);
fclose($f);
return $bytes_written;
}
}

?>
up
2
aabaev arroba gmail coma com
7 years ago
I suggest to expand file_force_contents() function of TrentTompkins at gmail dot com by adding verification if patch is like: "../foo/bar/file"

if (strpos($dir, "../") === 0)
$dir = str_replace("..", substr(__DIR__, 0, strrpos(__DIR__, "/")), $dir);
up
8
Anonymous
7 years ago
Make sure not to corrupt anything in case of failure.

<?php

function file_put_contents_atomically($filename, $data, $flags = 0, $context = null) {
if (
file_put_contents($filename."~", $data, $flags, $context) === strlen($contents)) {
return
rename($filename."~",$filename,$context);
}

@
unlink($filename."~", $context);
return
FALSE;
}

?>
up
7
aidan at php dot net
19 years ago
This functionality is now implemented in the PEAR package PHP_Compat.

More information about using this function without upgrading your version of PHP can be found on the below link:

http://pear.php.net/package/PHP_Compat
up
1
vaneatona at gmail dot com
7 years ago
I'm updating a function that was posted, as it would fail if there was no directory. It also returns the final value so you can determine if the actual file was written.

public static function file_force_contents($dir, $contents){
$parts = explode('/', $dir);
$file = array_pop($parts);
$dir = '';

foreach($parts as $part) {
if (! is_dir($dir .= "{$part}/")) mkdir($dir);
}

return file_put_contents("{$dir}{$file}", $contents);
}
up
2
John Galt
14 years ago
I use file_put_contents() as a method of very simple hit counters. These are two different examples of extremely simple hit counters, put on one line of code, each.

Keep in mind that they're not all that efficient. You must have a file called counter.txt with the initial value of 0.

For a text hit counter:
<?php
$counter
= file_get_contents("counter.txt"); $counter++; file_put_contents("counter.txt", $counter); echo $counter;
?>

Or a graphic hit counter:
<?php
$counter
= file_get_contents("counter.txt"); $counter++; file_put_contents("counter.txt", $counter); for($i = 0; $i < strlen($counter); $i++) echo "<img src=\"counter/".substr($counter, $i, 1).".gif\" alt=\"".substr($counter, $i, 1)."\" />";
?>
up
2
ravianshmsr08 at gmail dot com
13 years ago
To upload file from your localhost to any FTP server.
pease note 'ftp_chdir' has been used instead of putting direct remote file path....in ftp_put ...remoth file should be only file name

<?php
$host
= '*****';
$usr = '*****';
$pwd = '**********';
$local_file = './orderXML/order200.xml';
$ftp_path = 'order200.xml';
$conn_id = ftp_connect($host, 21) or die ("Cannot connect to host");
ftp_pasv($resource, true);
ftp_login($conn_id, $usr, $pwd) or die("Cannot login");
// perform file upload
ftp_chdir($conn_id, '/public_html/abc/');
$upload = ftp_put($conn_id, $ftp_path, $local_file, FTP_ASCII);
if(
$upload) { $ftpsucc=1; } else { $ftpsucc=0; }
// check upload status:
print (!$upload) ? 'Cannot upload' : 'Upload complete';
print
"\n";
// close the FTP stream
ftp_close($conn_id);
?>
up
3
Brandon Lockaby
12 years ago
Calling file_put_contents within a destructor will cause the file to be written in SERVER_ROOT...
up
2
wjsams at gmail dot com
14 years ago
file_put_contents() strips the last line ending

If you really want an extra line ending at the end of a file when writing with file_put_contents(), you must append an extra PHP_EOL to the end of the line as follows.

<?php
$a_str
= array("these","are","new","lines");
$contents = implode(PHP_EOL, $a_str);
$contents .= PHP_EOL . PHP_EOL;
file_put_contents("newfile.txt", $contents);
print(
"|$contents|");
?>

You can see that when you print $contents you get two extra line endings, but if you view the file newfile.txt, you only get one.
up
1
gurjindersingh at SPAM dot hotmail dot com
9 years ago
File put contents fails if you try to put a file in a directory that doesn't exist. This function creates the directory.

i have updated code of "TrentTompkins at gmail dot com". thanks
<?php
/**
* @param string $filename <p>file name including folder.
* example :: /path/to/file/filename.ext or filename.ext</p>
* @param string $data <p> The data to write.
* </p>
* @param int $flags same flags used for file_put_contents.
* more info: http://php.net/manual/en/function.file-put-contents.php
* @return bool <b>TRUE</b> file created succesfully <br> <b>FALSE</b> failed to create file.
*/
function file_force_contents($filename, $data, $flags = 0){
if(!
is_dir(dirname($filename)))
mkdir(dirname($filename).'/', 0777, TRUE);
return
file_put_contents($filename, $data,$flags);
}
// usage

file_force_contents('test1.txt','test1 content'); // test1.txt created

file_force_contents('test2/test2.txt','test2 content');
// test2/test2.txt created "test2" folder.

file_force_contents('~/test3/test3.txt','test3 content');
// /path/to/user/directory/test3/test3.txt created "test3" folder in user directory (check on linux "ll ~/ | grep test3").
?>
up
-1
curda222 at gmail dot com
2 months ago
An improved and enraptured code from TrentTompkins at gmail dot com

Note: Added error response
Note: Added directory detection
Note: Added root detection
Note: Added permissions when creating folder

function file_force_contents($dir, $contents, $flags = 0){
if (strpos($dir, "../") === 0){
$dir = str_replace("..", substr(__DIR__, 0, strrpos(__DIR__, "/")), $dir);
}
$parts = explode('/', $dir);
if(is_array($parts)){
$file = array_pop($parts);
$dir = '';
foreach($parts as $part)
if(!is_dir($dir .= "/$part")){
mkdir($dir, 0777, true);
}
if(file_put_contents("$dir/$file", $contents, $flags) === false ){
return false;
}
}else{
if(file_put_contents("$dir", $contents, $flags) === false ){
return false;
}
}
}

-Oliver Leuyim Angel
up
1
vahkos at mail dot ru
12 years ago
file_put_contents does not issue an error message if file name is incorrect(for example has improper symbols on the end of it /n,/t)
that is why use trim() for file name.
$name=trim($name);
file_put_contents($name,$content);
up
1
error at example dot com
13 years ago
It's worth noting that you must make sure to use the correct path when working with this function. I was using it to help with logging in an error handler and sometimes it would work - while other times it wouldn't. In the end it was because sometimes it was called from different paths resulting in a failure to write to the log file.

__DIR__ is your friend.
To Top